ASCII documentation of fiber duplex interconnects for expansion
of 100BT switched ports in Soda Hall.

Prepared by Phil Loarie for Fred Archibald. Last edit 11.24.98

==========================================================================
COMM Closets Labels from			288 Labels from Risers to
Risers to Hubs						Switch
--------------------------------------------------------------------------
7A-45,46					7A-45,46
R1H4**P25.......................................R8H4S1P1
169.229.35.27					169.229.35.27

6A-45,46					6A-45,46
R1H6**P25.......................................R8H4S1P2
169.229.35.26					169.229.35.26

5A-45,46					5A-45,46
R1H4**P25.......................................R8H4S2P1
169.229.35.24					169.229.35.24

5B-47,48					5B-47,48
R1H5**P25.......................................R8H4S2P2
169.229.35.25					169.229.35.25

4A-45,46					4A-45,46
R1H4**P25.......................................R8H4S3P1
169.229.35.22					169.229.35.22

4B-45,46					4B-45,46
R1H5**P25.......................................R8H4S3P2
169.229.35.23					169.229.35.23

3A-45,46					3A-45,46
R1H5**P25.......................................R8H4S7P1
169.229.35.20					169.229.35.20

3B-45,46					3B-45,46
R1H3**P25.......................................R8H4S7P2
169.229.35.21					169.229.35.21

========================================================================

The following cable conventions will be applied in all fiber pairs
mentioned on this page:

(order of pair)
The A/B coupler will be set on the SC side of the fiber pair so
that the B is inline with the 'striped' fiber side. The 'A' side
then is the non-striped side of the pair, it will be the first
input in the can and the 'B' will be the second input. Example,
'A' will go in 7A-45, while 'B' will go into 7A-46.

(label truncation)
In order to make it practical to label the following scheme is
employed on the each label:

First line is Riser (floor number followed by pair order).

Second line is R#H#S#P#, 'R' is for Rack number, 'H' is for Hub number
	'S' is for Slot number and 'P' is for Port number.
	NOTE: where there is no slot number available a double
		asterisk will be substituted. Example, R1H4**P25.
	NOTE: all COMM Closets are set to port 25, and where possible
		all risers are using #45,46 pair, the exception is
		the 5B COMM closet.

Third line is the IP address sans separation dots. Example:
	169.229.35.21 will show on the 3rd line of the label
	as 1692293521

(cable type)
All cables in 288 Soda will be 50 ft SC to ST multimode fiber duplex.
All cables in the associated COMM closets will be of the same type but
	cut to 20 ft. lengths.
All cables will bear their test tags near the SC side of the cable.
All cables will have source/destination labels at both ends.
========================================================================